 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com STPS1045HR Aerospace 2 x 10 A - 45 V Schottky rectifier Features Forward current: 2 x 10 A Repetitive peak voltage: 45 V Low forward voltage drop: 0.75 V Maximum junction temperature: 175 C Negligible switching losses Low capacitance High reverse avalanche surge capability Hermetic package Target radiation qualification: - 150 krad (Si) low dose rate - 1 Mrad high dose rate ESCC qualified SMD.5 Description This power Schottky rectifier is designed and packaged to comply with the ESCC5000 specification for aerospace products. Housed in a hermetically sealed surface mount package, it is ideal for use in applications for aerospace and other harsh environments. The STPS1045HR is intended for use in medium voltage applications and in high frequency circuits where low switching losses and low noise are required. Table 1. Device summary ESCC detailed specification 5106/017/02 Quality level Engineering model ESCC flight Configuration Package Lead finish EPPL SMD.5 Gold - Order code STPS1045CS1 STPS1045CSHRB Double die common cathode June 2010 Doc ID 17640 Rev 1 1/8 www.st.com 8 www..com Characteristics STPS1045HR 1 Characteristics Table 2. Symbol Absolute maximum ratings Characteristic Forward surge current (per diode)(1) Repetitive peak reverse voltage Repetitive peak reverse current (2) Value 200 45 1 10 20 15 -65 to +175 +175 -65 to +175 +245 10000 Unit A V A A A C C C C V/s IFSM VRRM IRRM IO IF(RMS) TOP TJ TSTG TSOL dV/dt (3) Average output rectified current (50% duty cycle):(4) per diode per device Forward rms current (per diode) Operating temperature range (case temperature) Junction temperature Storage temperature range Soldering temperature(5) Critical rate of rise of reverse voltage 1. Sinusoidal pulse of 10 ms duration 2. Pulsed, duration 5 ms, F = 50 Hz 3. Pulsed, duration 2 s, F = 1 kHz 4. For Tcase > +140 C, derate linearly to 0 A at +175 C. 5. Duration 5 seconds maximum and the same package shall not be resoldered until 3 minutes have elapsed. Table 3. Symbol Thermal resistance Characteristic Thermal resistance, junction to case per diode per device(2) Value Unit Rth(j-c)(1) 1.65 0.85 C/W 1. Package mounted on infinite heatsink 2. The per device ratings apply only when both anode terminals are tied togther. 2/8 Doc ID 17640 Rev 1 www..com STPS1045HR Table 4. Symbol s Characteristics Electrical measurements at ambiant temperature (per diode), Tamb = 22 3 C Characteristic Reverse Current MIL-STD-750 test method 4016 Values Test conditions Min. DC method, VR = 45V Pulse method, IF = 3 A Forward Voltage 4011 Pulse method, IF = 20 A Pulse method, IF = 20 A Capacitance Relative thermal impedance, junction to case 4001 3101 VR = 5 V, F = 1 MHz IH = 15 to 40 A, tH = 50 ms IM = 50 mA, tmd = 100 s Max. 100 620 750 880 500 A mV mV mV pF C/W Units IR VF1 (1) VF2(1) VF3 (1) C Zth(j-c)(2) Calculate VF(3) 1. Pulse width 300 s, Duty Cycle 2% 2. Performed only during screening tests parameter drift values (initial measurements), go-no-go 3. The limits for VF shall be defined by the manufacturer on every lot in accordance with MIL-STD-750 Method 3101 and shall guarantee the Rth(j-c) limits specified in maximum ratings. Table 5. Symbol Electrical measurements at high and low temperatures (per diode) Characteristic MIL-STD-750 test method 4016 Test conditions(1) Tcase = +125 (+0, -5) C DC method, VR = 45 V Tcase = +125 (+0, -5) C pulse method, IF = 3 A Tcase = +125 (+0, -5) C pulse method, IF = 10 A Tcase = -55 (+0, -5) C pulse method, IF = 10 A Tcase = +125 (+0, -5) C pulse method, IF = 20 A Values Units Min. Max. 15 570 700 850 800 mA mV mV mV mV IR VF1(2) Reverse Current VF2 (2) Forward Voltage 4011 VF3(2) 1. Read and record measurements shall be performed on a sample of 5 components with 0 failures allowed. Alternatively a 100% inspection may be performed. 2. Performed only during screening tests parameter drift values (initial measurements for HTRB), go-no-go. Doc ID 17640 Rev 1 3/8 www..com Configuration STPS1045HR 2 Configuration Figure 1. Available device configuration STPS1045CS STPS1045CSHRB 1 Terminal 1: Anode a Terminal 2: Common cathode Terminal 3: Anode b 2 3 The lid is not connected to any terminal 4/8 Doc ID 17640 Rev 1 www..com STPS1045HR Package Information 3 Package Information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Figure 2. Surface mount package (SMD.5), 3-terminal dimension definitions e b2 b3 2 1 D1 A A1 E D b1 3 b Table 6. Surface mount package (SMD.5), 3-terminal dimension values Dimension in millimetres Dimlension in inches Min. 0.112 0.010 0.281 0.220 0.090 0.115 0.395 0.030 0.291 0.075 Max. 0.124 0.20 0.291 0.230 0.100 0.125 0.405 0.301 Reference Min. A A1 b b1 b2(1) b3 (1) Max. 3.15 0.51 7.39 5.84 2.54 3.18 10.28 7.64 1.91 BSC 2.84 0.25 7.13 5.58 2.28 2.92 10.03 0.76 7.39 D D1(1) E e (1) 1. 2 locations Doc ID 17640 Rev 1 5/8 www..com Ordering Information STPS1045HR 4 Table 7. Ordering Information Ordering information ESCC detailed Package specification SMD.5 5106/017/02 Lead finish Gold Gold Marking STPS1045CS1 510601702 EPPL 2.0 Mass (g) Packing Strip pack Order code STPS1045CS1 STPS1045CSHRB 6/8 Doc ID 17640 Rev 1 www..com STPS1045HR Revision history 5 Revision history Table 8. Date 16-June-2010 Document revision history Revision 1 Initial release. Changes Doc ID 17640 Rev 1 7/8 www..com STPS1045HR Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 17640 Rev 1 |
Price & Availability of STPS1045HR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |